- Steering System[1]
- Truck Body Parts[2]
- Truck Engine[1]
- Truck Drivetrain & Axles[1]
- Truck Brake[1]
- Truck Suspension[1]
- Bulldozers[2]
- Construction Machinery Parts[8]
- Loaders[7]
- Road Roller[4]
- Car Washer[7]
- Iron Wire Mesh[3]
- Other Earthwork Products[1]
- Geogrids[3]
- Welding Rods[7]
- Other Welding Equipment[1]
- Other Tools[1]
- Other Hand Tools[5]
- Diagnostic Tools[7]
- Other Machinery[4]
- Bending Machinery[2]
- Other Metallurgy Machinery[1]
- Contact Person : Ms. Zhang Martina
- Company Name : Taian Yuexin Industry & Trade Co., Ltd.
- Tel : 0086-538-6203618
- Fax : 0086-538-8237667
- Address : Shandong,Tai'an,No. 317, Daizong Street
- Country/Region : China
- Zip : 271000
welding tools
NOTICE FOR USERS
1. FOR USING THE OXYGEN IN A BOTTLE,THE GAS CAN’T BE USED UP COMPLETELY.IT SHOULD BE KEPT 0.2MP
2. AFTER THE GAS BOTTLE IS MANUFACTURED FOR 3 YEARS, IT SHOULD BE TEST WITH THE WATER PRESSURE BY THE AUTHORIZED DEPARTMENT
3. THE GAS BOTTLE IS A HIGH PRESSURE CONTAINER, THE QUALITY GUARANTEE SHOULD BE OFFERED BY THE FACTURY
4. THE PRODUCTS PRODUCED BY OTHER FACTORY ARE NOT GUARANTEED BY US.OUR PRDUCTS ARE GURANTEED 6 MONTH ACCORDING TO OUR TRADE MARK
5. THE WHOLE SET IS FORBIDDEN TO BE STAINED WITH OIL AND NURSE A FIRE. THE TEMPERATURE ALLOWED IS WITHIN 45°C
6. THE SET MUST BE USED AND PLACED OFF FIRE MORE THAN 1 METERS
7. LIQUEFIED GAS FILLING SHOULD BE OPERATED IN THE BREEZY AND NO FIRE CIRCUMSTANCE
8. REFIT THE SET IS FORBIDDEN
THE METHOD FOR FILLING OXYGEN
TURN OFF THE SWITCH FOR GAS PRESSURE.TWEAK OFF THE FILLING BOLT AND PUT ON THE GAS CHARGING BRIDGETURN ON THE SWITCH ON THE LARGER BOTTLE A LITTLE. LET OUT SOME GAS TO CLEAR THE PIPE CONNECTING MOUTH.THEN, CONNECT THE OXYGEN INSTUMENT TO THE LARGER OXYGEN BOTTLE WITH THE CHARGING BRIDGETURN ON THE SWITCH ON THE LARGER OXYGEN BOTTLE.TURN ON SLOWLY THE SWITCH ON THE OXYGEN INSTRUMENT.OBSERVING THE PRESSURE METER, WHEN THE FINGER STOP MOVING UP, TURN OFF THE SWITCH ON THE OXYGEN BOTTLE. IF FINGER IN THE PRESSURE METER DOESN’T GET DOWN AFTER THE SWITCH ON THE OXYGEN BOTTLE IS TURNED OFF, IT MEAN THE BOTTLE HAS FULLED THE GAS. IN THAT CASE, YOU CAN TURN OFF THE SWITCH ON THE HIGH PRESSURE OXYGEN AND THE SWTCH ON THE SOURCE OXYGEN INSTRUMENT.OFFLOAD THE OXYGEN INSTRUMENT AND CHARGING BRIDGE. TWEAK BACK THE FILLING BOLT.THE OXYGEN BOTTLE CAN BE PUT IN ANY DIRECTION.IT IS THE NORMAL PHENOMENA FOR THE OXYGEN BOTTLE BECOMING HOTER DURING THE OXYGEN FILLINGTHE METHOD FOR FILLING BUTANE
OXYGEN | BUTANE | OXYGEN | BUTANE | MAX |
PRESSURE | PRESSURE | GAS CONSUME | GAS CONSUME | WELDING BOUND |
0.2—0.4 MPA | 0.01—0.02 MPA | 0.2—0.4 MPA | 50G/H | Ø 1—Ø 25MM |
welding tools